Capping Scratcher (Metal)
A stainless steel capping scratcher — also called an uncapping fork — for clearing the wax caps your knife leaves behind. The stiff stainless tines slip under cappings and lift them off the comb, reaching corners, edges, and sunken cells a knife or roller can't. Rugged construction and a wooden handle make this the durable, long-haul version.
Features
- Stainless steel tines — stiff and corrosion-resistant
- Wooden handle, ergonomically shaped
- Rugged construction for years of use
- Reaches corners and low spots a knife misses
- Easy to clean and sanitize
How it works in real life
After a knife or roller does the bulk of the frame, cappings always remain in the corners and in cells that sit below the surface. Slip the fork's tines under those caps and lift — the wax peels away so honey flows freely during extraction. Work at a shallow angle so the tines skim just under the caps rather than digging into the comb. The stainless tines are stiffer than plastic, so they clear firm or older cappings with less flex.
Before you order
A scratcher is a finishing tool, not a primary uncapper — fastest when paired with a knife or roller that handles most of the frame, leaving the fork to clean up the edges. Caution: the tine points are very sharp — handle and store with care. Prefer a lighter, lower-cost option? See the deluxe plastic capping scratcher.
Pairs Well With
- Capping Scratcher Deluxe (Plastic) — lighter, lower-cost version
- Double-Sided Honey Uncapping Knife — does the bulk of the frame
- Portable Uncapping Bench — holds the frame while you work
- Uncapping Punch Roller (Metal) — fast cell-breaking before the scratcher cleanup
Specifications
- Tines: stainless steel, sharp points
- Handle: wooden, ergonomic
- Weight: 0.12 lbs
- Dimensions: 8 × 1 × 1 in
- Cleaning: warm soapy water, dry the wooden handle
Frequently Asked Questions
What's a capping scratcher (uncapping fork) for?
It lifts the wax caps a knife or roller misses — especially in corners and sunken cells — so every cell is open before extraction.
Metal or plastic?
The metal fork has stiff stainless tines that clear firm cappings with less flex and last for years. The plastic version is lighter and lower-cost. Both do the same job.
Will it damage the comb?
Not if you work at a shallow angle so the tines skim just under the caps. Digging straight down can tear the comb.
How do I clean it?
Warm soapy water clears the wax and honey. Dry the wooden handle completely before storage to keep it in good shape.
